Sedum Jelly Bean is a favorite plant of succulent growers because of its colorful chubby, tiny red-tipped leaves that resemble jelly beans. Sedum rubrotinctum is another name for the jelly bean plant.
Since the leaves turn bronze in the summer, it’s also called pork-n-beans. Others call it “Christmas spirit.” Whatever you call them, Jelly Bean Sedums make an unusual plant in an arrangement or a pot by themselves.
According to jelly bean plant information, this plant is a hybrid of Sedum Pachyphyllum and Sedum Stahlii. As a result, it’s another candidate for neglect, and it thrives when left alone. You may also check the other variety of sedum like Sedum Major Succulent.
Sedum Jelly Bean Quick Information
- Jelly-Beans, Jelly Bean farm, Sedum rubrotinctum, Pork and Beans, Christmas Cheer, Stone Crop plants are some of the common names for this plant.
- Sedum rubrotinctum is the scientific name for this plant.
- Crassulaceae is a family of succulent cacti.
- Total Sun to Partially Shaded
- In the spring and summer, give the jelly bean plant more water.
- Zones 9 and 10
- Temperature: This succulent thrives in hotter environments.
- 12′′ (30 cm) tall and 12′′ (30 cm) wide
SEDUM JELLY BEAN SUCCULENT CARE GUIDE
It’s a lovely succulent that thrives in any environment – indoors or out, in a terrarium, or as a single crop – and can brighten up any scene. The Jelly Bean Plant is an excellent option for a low-maintenance succulent to keep on your desk or as a ground cover for your walkway.
Here’s what you need to do about caring for your Sedum Jelly Bean Succulent.
Watering Sedum Jelly Bean
Sedums can be kept in outdoor gardens all year in warm climates, and they can survive on very little water. If the weather warms up and there isn’t any rain for an extended time, you can water them more often. However, in watering sessions, make sure the soil is arid.
During the summer, water Sedum Jelly Bean succulents every ten days, according to gardening experts. As previously mentioned, plants can need more water during heat waves but don’t worry if you’re on vacation or forget to water them now and then.
Feeling the soil with your finger is the safest way to see if your Jelly Beans need more sugar. If the top inch of soil is fully dry, you can water the plants safely; if it’s wet, wait until it completely dries out before adding more water.
Sunlight Needs
Sedum Jelly Bean is a low-growing perennial succulent that thrives in the sun. When these succulents are happily stressed, their leaves turn a bright shade of red, but when not enough light enters them, they turn green all over.
Place this plant in a bright sunny position where it will receive at least 6 hours of sunlight per day if you want to keep its colorful leaves. You may also position your Sedum Jelly Bean in partly shaded areas. It will receive a few hours of direct sunlight for a splash of color.
During a heatwave, make sure your Jelly Bean is in a shadier location to avoid sun damage. You can also provide it with some sun protection or shade. That is particularly important during the hot summer months when the sun can easily scorch the plants if they are not covered.
Size and Growth
The Sedum Jelly Bean succulent grows up to one foot tall and is relatively fast-growing compared to other varieties.
The leaves spaced closer to the ends of the stems as it grows upward. The leaves are 12″ to 12″ in length and resemble bent thumbs.
Soil Requirements
When left in wet soil for an extended time, Sedum Jelly Bean will develop root rot like any other succulent and use a well-draining one to prevent this.
You can either purchase one from a local store or make your soil mix by combining a 2:1 solution of cactus mix and perlite in a blender.
You may also use sandy soil to create by combining coarse sand with a cactus mix or potting soil (about 2:1 ratio).
Potting and Repotting Sedum Jelly Bean
Grow the Sedum Jelly Bean plant in the field of containers. Those who live in colder climates may grow it as an annual or dig it up and transplant it into pots in the fall. Sedum is simple to develop; in most instances, simply burying a stem will suffice. After planting, wait a week or two before watering.
If Sedum Jelly Bean Succulent outgrows its jar pot, you will need to repot it. Since the stems are sprawling, don’t be concerned if they hang over the container’s edge. The roots are what you’ll want to keep an eye on. While this Sedum can tolerate being root-bound, it prefers to develop in a larger space.
Flowering and Fragrance
When given the proper environmental conditions, yellow flowers bloom in the spring. Jelly beans are found in flat clusters and have no discernible scent.
On the other hand, the leaves will not change color or bloom if it receives insufficient sun.
Temperature and Humidity
In the spring and summer, Sedum Jelly Bean prefers strong air circulation. It’s not picky about anything else. Since Jelly Beans are native to Mexico, they can be grown in zones 9 to 10 without concern.
However, this plant cannot withstand prolonged exposure to harsh winter conditions and below-freezing temperatures. If you live in an area where the temperature drops below 20 degrees Fahrenheit, keep them in containers that you can easily transport indoors, particularly before winter arrives.
Fertilizing Sedum Jelly Bean
Fertilizer isn’t needed, but it’s always beneficial. Offer your Sedum Jelly Bean plant14–12 strength fertilizer if you want to (balanced or low in Nitrogen).
During the spring and summer, use a high-quality succulent fertilizer once a month for the best results. If your Sedum Jelly Bean reaches a growth plateau, you can apply fertilizer.
Propagating Sedum Jelly Bean
When it comes to propagation, Sedum Jelly Bean succulents are very abundant. New plants can quickly be grown from fallen leaves. It’s not unusual for Jelly Bean plants to lose their leaves now and then. If you want to spread them but don’t have fallen leaves on hand, you can manually cut any.
Jelly Bean leaves are best plucked by gently twisting and dragging them away from the main plant. It’s crucial to be gentle with your Sedum and freshly cut leaves because you don’t want to stress them out.
Stem cuttings are another method for propagating jelly bean plants. Use a sharp, sterile knife or a pair of sharp gardening scissors to make a clean cut that will not damage the plant.
Another good way to cultivate Sedum Jelly Bean is to divide them in half at the start of the growing season (in spring). If you choose this process, make a clean cut from the top of the succulent down to its roots with a sharp, sterile knife. Cut the roots without destroying them and position them in a succulent soil mix that is moderately damp.
Pruning
You can quickly prune your Jelly Beans if they are getting too large or have any unappealing stems. However, this is purely aesthetic.
You can use sharp pruning shears to make a clean cut without crushing the stem while pruning. Keep the cut area dry for a few days before it calluses.
Pests and Diseases
Pests are rarely attracted to Sedum Jelly Bean. Keep the plant and soil as dry as possible to help prevent any from appearing. Jelly Beans, like most succulents, are prone to root and stem rot. Too much moisture in the soil or on the leaves typically causes this.
Fungal diseases and bacteria will quickly infect the plant if it rots. Once contaminated, these spread rapidly, so it’s critical to address the problem as soon as possible. Wilting, discoloration and mushy flesh are all symptoms.
Removing the rotted parts is the most effective control process. Remove any parts of the stem or diseased roots that tend with a sterile knife. If this is the case for most of the plant, you should remove it and propagate the healthy stems.
Repot your Jelly Beans in fresh, dry soil after removing the rotted pieces. Before watering the vine, let the wounds heal. Overwatering can cause rot, so don’t do it again.
GROWING PROBLEMS YOU MAY ENCOUNTER
When handled or even rubbed against, Sedum Jelly Bean is known to drop leaves. It is, however, may be a sign of overwatering. Check the soil and see if it’s draining correctly if the fallen leaves seem mushy or discolored. If it isn’t, wait until it dries out before watering again or repot with dry soil.
Succulents are known for their stretched-out stems. A lack of sunshine is the source of this. If your Sedum Jelly Bean is becoming tall and lean, switch it to a brighter place. If you harmed and the only thing left long stems, prune them back to enable them to regrow normally.
Succulents like Sedum Jelly Bean are not only cute and unique in appearance, but they’re also effortless to care for and grow. They thrive in humid, sunny locations and only need a little water from time to time.
Sedum Jelly Bean is a versatile and easy-to-care-for succulent that also has an unusual shape and color. This plant makes a perfect decorative plant that can be used alone or in combination with other succulents in both outdoor and indoor settings.
